The date of this Price/Parts list is uncertain, probably early Fifties.
ENGINE
Part No. No. per Description Price each
set
CASA.3 1 Cylinder-head Unit consisting of-
19.217A I Cylinder Head .. ..... ... 7/6
19.221A I Decompressor Sleeve ....... ... 2/0
19.222A I Decompressor Valve ... 2/0
19.223 I Decompressor Spring ...... 4d.
BS.3623 1 Decompressor-spring Retainer .... 6d
BS.3620 I Decmpressor Bracket Unit .. ... 2/6
BS.3626 1 1/16" Split Pin ... ,.. ... ... 1d
BS.3633 I 5/16" BSF Nut ... .... .. .. 1d.
BS.3634 I 5/16" Shakeproof Washer - -. ... 1d.
19.224 1 Cylinder-head Gasket ... ... 6d.
BS.3636S 4 Cylinder-head Nut (1/4"BSF Steel) ... 1d.
BS.3617 4 1/4" Shakeproof Washer...... 1d.
BS.3638 4 1/4" Plain Washer. .. .. 1d.
CASA.5 I Cylinder-block Unit consisting of:-
19U.209A I Cylinder Block and Liner ... .. 40/0
19,216 2 Exhaust-flange Stud ... .. --- 2d
BS.3475 I Inlet Manifold ... ., -- ... 2/0
BS.3478 I Inletflange Gasket .., ... , -. 3d.
BS.3474 2 Inlet-flange Screw .. .. .. .. 1d.
BS.3649 2 3/16 Shakeproof Washer .. .. . 1d.
19.218 1 Cylinder-base Gasket ... ... ... 3d.
19.215 4 Cylinder Stud ... ... ... ... 1/0
CASA.8 I Crankcase Unit consisting of:-
19.201-2 1 pr. Crankcases .. .. .. .. . . 30/0 pair
BS.3483 1 Crankcase Dowel .. .. .. 4d.
BS.3480 2 Crankshaft Bearing ... .. .. 6/0
BS.3481 2 Drive-shaft Bearing... .. .. 5/6
BS.3482 1 Drive-shaft Oil Seal... ... ... 1/9
19.205 1 Crankcase Gasket ... ... ... 3d.
19.206 1 Crankcase/Magneto-housing Gasket .. 3d
CASA.9 1 Magneto-housing Unit consisting of:-
BS.3491 1 Magneto Housing ... ... ... 18/0
19.219A 1 Drive-shaft Thrust Pad ... .. ... 6d.
BS.3481 1 Crankshaft-extension Bearing .... 5/6
BS.3482 1 Crankshaft Oil Seal .. .. .. . 1/9
BS.3496 2 Magneto Stud ... .. ... ... 2d.
BS.3643 2 Crankcase Bolt 2BA x 1" ... -.. 2d.
BS.3644 4 Crankcase Bolt 2BA x 2 3/8" .. ... 2d.
BS.3645 2 Crankcase Screw 2BA x l 3/16" .. 1d.
BS.3647 6 Crankcase Nut 2BA ... ... ... . 1d.
BS.3649 8 3/16" Shakeproof Washer ... ... 1d.
CASA.10 1 Crankshaft Unit consisting of:- 78/0
*BS.3494 1 Crankshaft Extension with Pinion .. 30/0
*l9.236A 2 Balance Weight .. .. .. 6/0
*19.247A 1 Crankpin ... .. .. 2/0
*19.235A 18 Needle Rollers .. .. .. .. . 2d
*19.238A 2 Needle-roller Thrust Washer .. 1/0
*19.233A 1 Connecting-rod ,,. ... .. ... 15/0
*l9.234A 1 Small-end Bush ... ... ... .. 2/6
CASA.11 Piston Unit consisting of:- 18/0
19.128 1 Piston ... ... ... ... 13/0
19.129 2 Piston Ring ... ... ... 2/0
19.131 1 Gudgeon Pin ... ... ... ... 2/6
19.132 2 Gudgen-pin Circlip ... ... ... 3d.
19U.212A 1 Drive Shaft and Gear . .. ... 18/0
19.239 1 Drive-shaft Thrust Washer ... ... 4d.
19.242A 1 Drive-shaft Distance Tube -.. .. 6d.
l9.246A 1 Drive-shaft Pulley ... .. 10/6
BS.3653 1 Pulley-securing Nut (3/8"BSF) .. .. 1d.
BS.3654 1 3/8" Shakeproof Washer ... .. 1d.
CASA.14 1 Exhaust System ... .. 30/0
19.301 1 Exhaust-flange Gasket ... .. 3d.
BS.3636B 2 Exhaust-flange Nut (1/4"BSF Brass) .. .. 1d.
BS.3637 2 1/4" Shakeproof Washer .. .. .. 1d.
BS.3508 1 Magneto (ignition only) ... ... 80/0
BS.3512 1 Magneto (ignition and lighting) ... 90/0
BS.3513 1 Magneto Cam (ignition and lighting) 4/0
BS.3514 1 Magneto-cam Key (ignition and lighting) .. .. 2d.
BS.3515 1 Cam-locating Spring (ignition and lighting) ... 6d.
BS.3486 1 Magneto-flywheel Key .. .. . 6d.
BS.3633 1 Flywheel-securing Nut (5/16"BSF) ... 1d.
BS.3634 1 5/16" Shakeproof Washer ... . . .. 1d.
BS.3497 2 Slotted Nut for Magneto Stud (O.BA) 4d.
BS.3639 2 0.B.A. Plain Washer ... ... .. 1d.
BS.3640 2 0.BA Shakeproof Washer ... 1d.
BS.3500 1 Carburettor ... ... ... 39/3
BS.3613 1 Throttle Control consisting of:-
BS.3613A 1 Throttle Cable (inner and outer) .. .. 3/0
BS.36l3B 1 Twistgrip Control ... ... ... 10/6
BS.36l4 1 Decompressor Control consisting of:--
BS.3614A 1 Decompressor Cable (inner and outer) 5/0
BS.3614B 1 Handle-bar Lever ... ... ... 10/6
BS.3625 1 Decompressor-cable Holder ... ... 6d.
BS.3503 1 Sparking-plug and Washer . . .. 5/0
BS.3506 1 Sparking-plug Insulator (suppressed) .. 2/6
See separate Spares List for details of Carburettor BS.3S00, ignition
Magneto BS,35O8 and Ignition/Lighting Magneto BS.3512.
*These parts are not generally supplied separately as special
equipment is required for assembling them.
PETROL TANK AND MOUNTlNGS
BS.3550 1 Petrol Tank ... ... . . .. 65/0
BS.3555 1 Filler Cap .. ... ... 3/6
BS.3556 1 Filler-cap Washer ... ... 3d.
BS.3610 1 Petrol tap and Washer .. ... 5/6
BS.3617 2 CYCLAID Transfer ... .. 1/0
BS.3571 1 Rear Number Plate ...- - - ... 3/0
BS.3650 5 Number-plate Securing Screw (4BA) 1d.
BS.3652 5 4BA Shakeproof Washer 1d.
BS.3604 1 Petrol Pipe ... ..... ... 2/0
BS.3605 1 Petrol-pipe Ferrule ... ... .. 2d.
BS.3526/1 1 R/h. Front Mounting Plate (low type) .. 6/0
BS.3527/1 1 L/h. Front Mounting Plate (low type) ... 6/0
BS.3526/2 1 R/h. Front Mounting Plate (raised type) ... 6/0
BS.3527/2 1 L/h. Front Mounting Plate (raised type) ... 6/0
BS.3531 4 Rubber Shock-absorber .. .. 3d.
BS.3532 2 Shock-absorber Distance Tube ... 4d.
BS.3533 4 Shcck-absorber Retaining Washer .. 3d.
BS.3630 1 SaddIe-pillar Bolt (5/16" BSF x 3 1/4") .. 3d.
BS.3633 1 Saddle-pillar Nut (5/16" BSF) .. 1d.
BS.3634 1 5/16" Shakeproof Washer ... .. 1d.
BS.3575 1 Rear Mounting Bracket ... .. 8/0
BS.3631 2 Screw for Front Mounting Plates and
Rear Mounting Bracket (5/16" BSF x 2 1/16") 3d.
BS.3633 1 Front Mounting-plate Nut (5/16" BSF) 1d.
BS.3634 2 5/16" Shakeproof Washer ... .. 1d.
BS.3633 4 Nut for Petrol-tank Studs. (5/16" BSF) .. 1d.
BS.3634 4 5/16" Shakeproof Washer .. .. 1d.
CASA.21 1 Rear Upper Support Unit consisting of:-
BS.3581 1 Rear Upper Stay (welded assembly) .. 17/0
BS.3585 1 Spring ... ... ... ... 2/0
BS.3586 1 Sliding Block ... ... ... ... 4/6
BS.3587 2 Rubber Buffer ... .. .. 6d.
BS.3533 1 Buffer Washer ... .. 3d.
BS.3632 1 Block-retaining Screw (5/16" BSF x 7/16") .. 3d.
BS.3634 1 5/16" Shakeproof Washer .. ... 1d.
BS.3632 2 Rear-mounting Adjustment Screw (5/16" BSF x7/16") 3d.
BS.3634 2 5/16" Shakeproof Washer .. ... 1d.
BS.3635 2 Plain Washer ... ... .. 1d.
BS.3592 2 Rear Lower Stay ... ... 7/6
BS.3632 4 Rear-stay Screw (5/16" BSF x 7/16") .. .. 3d.
BS.3633 4 Rear-stay Nut ( 5/16" BSF ) ... ... 1d.
BS.3634 4 5/16" Shakeproof Washer .. .. .. 1d.
BS.3635 4 5/16" Plain Washer ... .. .. 1d.
BS.3595/1 2 Spindle Extension (for 3/8" x 26 thread,
i.e., most single-speed spindles and
B.S.A. variable-speed hubs) .. .. 1/6
BS.3595/2 2 Spindle Extension (for 13/32 x 26
thread, i.e., Sturmey-Archer and
Hercules variable-speed hubs) .. .. 1/6
BS.3595/3 2 Spindle Exetension (for 5/16" x 26
thread.i.e., Raleigh single-speed spindles 1/6
BS.3596 2 Spindle-extension locknut ... ... 3d.
AUXILIARY PARTS
19.338A 1 Wheel Pulley .. .. 5/0
19.337 20 Wheel-pulley Strap Nut (4.BA) .. .. 2d.
BS.3650 40 Wheel-pulley Screw (4.BA x 5/16") .. 1d.
BS.3612 1 Driving Belt (state frame and wheel
sizes of bicycle when ordering) .. 12/0
BS.3606 1 Front Number Plate .. .. 3/0
BS.3611 1 Rear Light (complete) .. .. 5/6
BS.3616 Control-cable Clip (rubber) .. .. 3d.
BS.3536 1 Saddle-pillar Mounting Bracket
(where necessary) .. .. 10/6
TOOLS
No tools are supplied with CYCLAID Units, but the following are
available at extra cost:
CASA.25 1 Cylinder-head Spanner .. 3/0
CASA.24 1 Withdrawal Tool (for Drive-shaft
pulley and Magneto Flywheel) .. 20/0
EXCHANGE SERVICE
The following reconditioned assemblies, when available, can be supplied
in exchange for the equivalent worn parts, provided the latter are not
damaged:
Cylinder and Liner .. .. £1/5/0
Crankshaft Assembly (inc. Connecting
rod) .. .. £1/19/0
Replacement Engine .. .. £5/0/0
Under this scheme the old assembly must be sent to British Salmson
Cyclaid Ltd., Industrial Estate, Larkhall. Lanarkshire, at the same time
as the order. Worn engines must be returned complete with carburettor,
magneto, sparking-plug, and throttle cable, but the petrol tank, mounting
plates, rear mounting bracket, and all other accessories should he retain-
ed for use on the replacement.
No responsibility can be accepted for units or components sent to our
London Office.
When ordering spare parts, please state make of bicycle, frame and wheel
sizes, make of variable-speed gear(if fitted),and engine serial number. The
last will be found stamped on the pulley side of the crankcase/cylinder
flange.
These prices are subject to alteration due to fluctuation in the costs of
wages and materials.
Back to BIKES page